HomeProduct SearchSite MapCheckoutTrack Your Order
5C Stops
5C Collet Stop Set

5C Collet Stop Set

5C Collet Stop Set
Click to enlarge image(s)
This 5C Collet Stop Set can be used directly with any standard 5C collet and in any machine with an internal tube diameter having a minimum I.D. of 1.125"

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others.

Note:
Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900")

5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

What you get:

SIX 5C Collet Stop’s. Set comes complete with 6 machinable adjuster rods and all have
½” - 20 TPI jam nuts.
( rod tip diameters are: 1/8" , 1/4" , 3/8" , 1/2" & 3/4").

Two Extender Tubes ( One 4" and One 8" which can be combined for a total length of 12")

Four Threaded tube end bushing which has 13/16" milled flats.

One 5C Collet Wrench with protective vinyl handle.

One Wooden Storage Base to store and protect collet stops and tubes when not in use.
3pc. 5C Collet Stop Set With Wood Base

3pc. 5C Collet Stop Set With Wood Base

3pc. 5C Collet Stop Set With Wood Base
Click to enlarge image(s)
This 3 pc. 5C Collet Stop Set can be used directly with any standard 5C collet and in any machine with an internal tube diameter having a minimum I.D. of 1.125"

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others.

Note:
Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900")

5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

What you get:

One 1/2" 5C Collet Stop.
( rod tip diameter is 1/2" )

One 4" Extender Tube (  which can be combined with other tubes to extend total length.)

One 5C Collet Wrench with protective vinyl handle.

One Wooden Storage Base to store and protect collet stops and tubes when not in use.
3pc. 5C Collet Stop Set Without Wood Base

3pc. 5C Collet Stop Set Without Wood Base

3pc. 5C Collet Stop Set Without Wood Base
Click to enlarge image(s)
This 3 pc. 5C Collet Stop Set can be used directly with any standard 5C collet and in any machine with an internal tube diameter having a minimum I.D. of 1.125"

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others.

Note:
Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900")

5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

What you get:

One 1/2" 5C Collet Stop.
( rod tip diameter is 1/2" )

One 4" Extender Tube (  which can be combined with other tubes to extend total length.)

One 5C Collet Wrench with protective vinyl handle.

 
5C Collet Stop with 1/2" Tip

5C Collet Stop with 1/2" Tip

5C Collet Stop with 1/2" Tip
Click to enlarge image(s)
For use with any standard 5C collet having an internal thread
Threaded stop rod is threaded it's full length with slot on one end
5C Collet Stop with 3/8" Tip

5C Collet Stop with 3/8" Tip

5C Collet Stop with 3/8" Tip
Click to enlarge image(s)
For use with any standard 5C collet having an internal thread
Threaded stop rod is threaded it's full length with slot on one end.

Tip is 3/8" Dia. x 1" Length.
5C Collet Stop with 1/4" Tip

5C Collet Stop with 1/4" Tip

5C Collet Stop with 1/4" Tip
Click to enlarge image(s)
For use with any standard 5C collet having an internal thread
Threaded stop rod is threaded it's full length with slot on one end.

Tip is 1/4" Dia. x 1" Length.
5C Collet Stop with 1/8" Tip

5C Collet Stop with 1/8" Tip

5C Collet Stop with 1/8" Tip
Click to enlarge image(s)
For use with any standard 5C collet having an internal thread
Threaded stop rod is threaded it's full length with slot on one end.

Tip is 1/8" Dia. x 1" Length.
5C Extention Tube Set

5C Extention Tube Set

5C Extention Tube Set
Click to enlarge image(s)
 2 Inch , 4 Inch and 8 Inch Extension Tube Set for 5C Collets used on Hardinge Lathes, Chuckers, Mills, CNC, and others.

Note:
    Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900")
    
    5C Collet Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.
    
    For use with 5C collet’s (not supplied) of the standard type with I.D. and O.D. threads.

    What you get:

Set Includes:
        
          Three Extender Tubes 
One 2" - One 4" and One 8" which can be combined for a total length of 14")
                                   
Manufactured Proudly in United States of America by us.
2" 5C Extention Stop Tube

2" 5C Extention Stop Tube

2" 5C Extention Stop Tube
Click to enlarge image(s)
 2 Inch Extension Tube  for 5C Collets used on Hardinge Lathes, Chuckers, Mills, CNC, and others.

Note:
    Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900")
    
    5C Collet Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.
    
    For use with 5C collet’s (not supplied) of the standard type with I.D. and O.D. threads.

4" 5C Extention Stop Tube

4" 5C Extention Stop Tube

4" 5C Extention Stop Tube
Click to enlarge image(s)
 4 Inch Extension Tube  for 5C Collets used on Hardinge Lathes, Chuckers, Mills, CNC, and others.

Note:
    Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900")
    
    5C Collet Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.
    
    For use with 5C collet’s (not supplied) of the standard type with I.D. and O.D. threads.

   

What You Get:
        

One 4" Extender Tube  
                                   
Manufactured Proudly in United States of America by us.
8" 5C Extention Stop Tube

8" 5C Extention Stop Tube

8" 5C Extention Stop Tube
Click to enlarge image(s)
 8 Inch Extension Tube  for 5C Collets used on Hardinge Lathes, Chuckers, Mills, CNC, and others.

Note:
    Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900")
    
    5C Collet Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.
    
    For use with 5C collet’s (not supplied) of the standard type with I.D. and O.D. threads.

   

What You Get:
        

One 8" Extender Tube  
                                   
Manufactured Proudly in United States of America by us.
5C Collet Stop with 7/8" Tip - for 8" Stop Tube

5C Collet Stop with 7/8" Tip - for 8" Stop Tube

5C Collet Stop with 7/8" Tip - for 8" Stop Tube
Click to enlarge image(s)
For use with any standard 5C collet having an internal thread
Threaded stop rod is threaded it's full length with slot on one end.

Tip is 7/8" Dia.
Total Length is 6".
For Product Questions
E-Mail  jim_b@metrocast.net
or
Call:  1-800-746-8767
 
Copyright © F.P. Viana and Associates, LLC Tilton, New Hampshire
frankviana@metrocast.net