HomeProduct SearchSite MapCheckoutTrack Your Order
Breakheart Tool Company Products
8 Pc Expanding Arbor Set

8 Pc Expanding Arbor Set

8 Pc Expanding Arbor Set
Click to enlarge image(s)
Breakheart Tool Company's Original 8 pc Expanding Arbor Set
1/4 - 3/8 - 1/2 - 5/8 - 3/4 - 7/8 - 1.0 - 1-1/4" sizes
Made with Pride in America from 12L14 steel they can be used as is or you can easily machine them for your custom needs.
Great for use on lathes, milling machines, grinders, chucks, collets and fixtures. The 1" shank on the 1" & 1-1/4" will fit just about anyplace.
Dwg.Specifications
4 Pc Expanding Arbor Set

4 Pc Expanding Arbor Set

4 Pc Expanding Arbor Set
Click to enlarge image(s)
New Hand-e 4 piece Expanding Arbor Set
Breakheart Tool Company's OriginalExpanding Arbors
Set includes 1/4" - 3/8" - 1/2" - 5/8" sizes
Made with Pride in America from 12L14 steel they can be used as is or you can easily machine them for your custom needs.
Great for use on lathes, milling machines, grinders, chucks, collets and fixtures.
3 pc Expanding Arbor Set

3 pc Expanding Arbor Set

3 pc Expanding Arbor Set
Click to enlarge image(s)
Hande-E Expanding 3pc Arbor Set
Large Arbor Set with 1-1/2 - 1-3/4 - 2 Inch Arbors
5C Collet Wrench with vinyl handle

5C Collet Wrench with vinyl handle

5C Collet Wrench with vinyl handle
Click to enlarge image(s)
A handy 5C collet wrench that will not damage the precision surface of your collets and the soft covered handle is easy on your hands.
5C Collet Stop Set

5C Collet Stop Set

5C Collet Stop Set
Click to enlarge image(s)
This 5C Collet Stop Set can be used directly with any standard 5C collet and in any machine with an internal tube diameter having a minimum I.D. of 1.125"

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others.

Note:
Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900")

5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

What you get:

SIX 5C Collet Stop’s. Set comes complete with 6 machinable adjuster rods and all have
½” - 20 TPI jam nuts.
( rod tip diameters are: 1/8" , 1/4" , 3/8" , 1/2" & 3/4").

Two Extender Tubes ( One 4" and One 8" which can be combined for a total length of 12")

Four Threaded tube end bushing which has 13/16" milled flats.

One 5C Collet Wrench with protective vinyl handle.

One Wooden Storage Base to store and protect collet stops and tubes when not in use.
5C Expanding Collet Set

5C Expanding Collet Set

5C Expanding Collet Set
Click to enlarge image(s)
5C Expanding Arbor Set for CNC
2" 5C Extention Stop Tube

2" 5C Extention Stop Tube

2" 5C Extention Stop Tube
Click to enlarge image(s)
 2 Inch Extension Tube  for 5C Collets used on Hardinge Lathes, Chuckers, Mills, CNC, and others.

Note:
    Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900")
    
    5C Collet Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.
    
    For use with 5C collet’s (not supplied) of the standard type with I.D. and O.D. threads.

16C Collet Stop Set-1

16C Collet Stop Set-1

16C Collet Stop Set-1
Click to enlarge image(s)
Extended 16C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others.

Note:
    Easily and Accurately locate parts in a standard 16C collet or locate parts 7/8" diameter or smaller in a 5C collet extenshion tube with internal and external threads ( Extender tube I.D. is .900") with internal and external threads.
Tube fits inside a 5C collet or a 16C collet when used with the 16C flange Collet Adapter. 
    
    Set Includes:
         Five Machinable Adjuster Rods, all have ½" - 20 TPI jam nuts.
          ( rod tip diameters are: 1/8" , 1/4" , 3/8" ,  1/2"  &  7/8").

         One 16C to 5C Flange Adapter.          
          Three    Extender Tubes  (One 2" - One  4" and One 8" which can be combined for a total length of 14")
                                    Adjuster rod is locked firmly in position by tightening jam nut against threaded tube flange nut which has 13/16" milled wrench flats.
          Four   5C Flange Nuts with 13/16" milled wrench flats.
          One    16C / 5C Collet Wrench with protective vinyl handle.
         
One    1/4" Rod for tightening Extender Tubes.                                 
          One     Wooden Storage Base to store and protect collet stops and tubes when not in use.  


 
16C Collet Adapter

16C Collet Adapter

16C Collet Adapter
Click to enlarge image(s)
A handy 16C collet Adapter Used to adapt 5C collets and extension tubes to 16C collets.
For Product Questions
E-Mail  jim_b@metrocast.net.com
or
Call:  1-800-746-8767
 
Copyright © F.P. Viana and Associates, LLC Tilton, New Hampshire
frankviana@metrocast.net